Reviewed by Tom Orr, founder and CEO of Northwest Exteriors · 30+ years in home improvement · CA Contractor License #710798 · Updated November 3, 2026

Nationally, replacement windows average about $800 each installed in 2026. Here in the Sacramento area, most homeowners pay somewhere between $500 and $800 per window for a quality energy-efficient vinyl replacement window, installed. Premium frames like fiberglass or wood-clad run higher, often $1,000 to $1,500 or more per window. For a typical three-bedroom house with 10 to 15 windows, that puts most whole-house projects somewhere around $5,000 to $12,000.

That is a wide range, and it should be. A small slider in a hallway bathroom and a large west-facing picture window are not the same job. This guide walks through what actually moves the price in the Sacramento area, what different window types and materials tend to cost, and what to look for when you compare quotes. These are market averages from published 2026 cost data, and they make a good starting point if you are budgeting for a project in 2027 too. They are not a quote for your home. For an exact number, we measure and price every window at a free in-home estimate.

Current offer: 10 windows for $7,995

Northwest Exteriors Fall Into Savings offer, 10 windows for $7,995

Our Fall Into Savings special gets you 10 new windows for $7,995. That works out to about $800 per window, which sits right in the Sacramento range for a quality energy-efficient vinyl window. It is available for a limited time. Up to 750 UI. Must present offer. Cannot be combined with other offers or prior purchases. Additional restrictions may apply.

See the offer details or call 916-727-6717 to book a free estimate.

Window Replacement Cost Calculator

Plug in your windows to get a ballpark range. The math uses Sacramento-area market averages for installed replacement windows, so treat it as a planning number, not a quote.

Estimates are rounded market ranges and do not include permits, rot repair, or unusual access. Your exact price comes from a free in-home measurement.

Average Cost Per Window in Sacramento (2026–2027)

Here is roughly what you can expect to pay per window, installed, for standard sizes in the Sacramento region:

Window type Typical cost per window, installed
Basic dual-pane vinyl $300 to $600
Energy-efficient vinyl (Low-E glass, argon gas) $500 to $800
Fiberglass or wood-clad $1,000 to $1,500+
Bay or bow window $900 to $7,000+

Most homes in our area end up in the energy-efficient vinyl tier, and there is a practical reason for that. California’s energy code (Title 24) generally requires replacement windows here to have a U-factor of 0.30 or lower and a Solar Heat Gain Coefficient (SHGC) of 0.23 or lower. A window that meets those numbers is the kind that actually keeps a Sacramento living room comfortable in July.

2026–2027 Whole-House Cost by Number of Windows

If you are replacing every window at once, the window count does most of the work. Using the $500 to $800 range for energy-efficient vinyl:

Number of windows Typical project range
6 windows $3,000 to $4,800
10 windows $5,000 to $8,000
15 windows $7,500 to $12,000
20 windows $10,000 to $16,000
25 windows $12,500 to $20,000

Choosing fiberglass, adding a bay window, or replacing a few oversized openings will push a project above these ranges. A house full of small, standard sliders usually lands toward the low end.

Window Replacement Cost by Home Size

Home Typical window count Typical range (energy-efficient vinyl)
Condo or 2-bedroom house 6 to 8 About $3,000 to $6,400
3-bedroom, single-story 10 to 15 About $5,000 to $12,000
4-bedroom or two-story 15 to 25 About $7,500 to $20,000

Two-story homes usually cost a bit more per window because upper-floor windows take more time and equipment to install safely.

Window Replacement Cost by Frame Material

Frame material is one of the biggest swings in price. National 2026 data puts the per-window, installed ranges roughly here:

Frame material Typical cost per window, installed (national) Notes
Vinyl About $350 to $1,600 The best value for most Sacramento homes. Quality vinyl meets Title 24 easily.
Fiberglass About $400 to $2,200 Stronger and more stable, good for large or dark-colored windows.
Wood or wood-clad About $600 to $2,200+ Beautiful on older homes, but needs more upkeep in our sun.
Composite About $300 to $2,500 Wide range depending on brand.
Aluminum About $200 to $800 Low upfront cost, but conducts heat. Rarely the right pick here.

The spread inside each range comes from size, glass package, brand, and installation. In the Sacramento area, a quality energy-efficient vinyl window lands around $500 to $800 installed for most standard sizes.

Cost by Window Style

Window style Typical cost per window, installed (national)
Single-hung About $250 to $700
Double-hung About $300 to $1,000
Awning About $300 to $800
Picture About $300 to $1,600
Casement About $400 to $1,200
Sliding About $700 to $1,500
Bay About $900 to $4,500
Bow About $1,500 to $8,000

Sliders are the most common style in Sacramento tract homes. See our guide to window types if you are deciding between styles.

Window Replacement Cost in Other Areas We Serve

Prices shift from region to region, mostly because of labor costs and local building rules. If you live outside the Sacramento area, see our local guides for Roseville and Granite Bay, Fresno and Clovis, Bakersfield, and Santa Rosa and Sonoma County. Each one has a calculator tuned to that market.

What Moves the Price Up or Down

Two homes on the same street can get very different quotes. These are the things that make the difference:

  • Size and count. Bigger windows cost more, and so do more windows. Per window, though, larger projects are usually more efficient than one or two at a time.
  • Style. Sliders and single-hung windows are generally the most affordable. Casement, awning, and specialty shapes cost more, and bay and bow windows are in their own category.
  • Frame material. Vinyl is the best value for most Sacramento homes. Fiberglass and wood-clad frames often cost about twice as much as a comparable vinyl window.
  • Color. White and tan frames are standard. Black and other dark exterior colors look great and are very popular right now, but they add to the price.
  • Glass upgrades. Extra Low-E layers for west-facing walls, laminated glass for noise near I-5, I-80, or Highway 50, and tempered glass where code requires it (near doors, tubs, and showers) all add cost.
  • Installation type. Retrofit windows cost less than full-frame replacement. More on that below.
  • Access and repairs. Second-story windows, hard-to-reach openings, and dry rot in old wood frames all add labor.
  • Permits. Many California cities require a permit for window replacement, usually somewhere between $100 and $1,000 depending on the city and the size of the job.

Retrofit vs. Full-Frame: Why It Matters for Cost

A retrofit window fits inside your existing frame. Most Sacramento homes have stucco exteriors, and retrofit lets us replace the window without cutting into the stucco. It is faster and less expensive, and it is the right fit for most homes we see.

A full-frame replacement removes the old window down to the rough opening. It costs more because it can involve new trim, framing repairs, and stucco or siding patch work. It makes sense when the old frame is rotted or out of square, or when you want to change the size of an opening. A good contractor will tell you which one your home actually needs instead of defaulting to the more expensive option.

How to Keep the Cost Down Without Cutting Corners

  • Do the whole house, or a big group of windows, in one project. You avoid paying for multiple trips and setups.
  • Spend where it counts. West- and south-facing windows take the most sun in Sacramento, so that is where better glass pays off the most.
  • Stick with standard colors if the budget is tight. White or tan frames keep the price lower than black.
  • Ask about current specials and financing. Our specials page lists current offers, and financing is available on approved credit through our financing options.

Tax Credits and Rebates in 2026 and 2027

The federal tax credit for energy-efficient windows (Section 25C) ended for windows installed after December 31, 2025. If you come across an older article promising a federal credit, it no longer applies, and as of this update no new federal window credit has replaced it for 2027. Local utilities such as SMUD and PG&E run their own programs from time to time, and those change often, so it is worth checking what is available when you are ready to buy.

Planning a Window Project for 2027?

If you are looking ahead to next year, a few things are worth keeping in mind:

  • Use these ranges as a planning number. Window prices move with material and labor costs, and published averages get updated every year. Get a current written quote closer to your project date.
  • Offers change. The special running today will not necessarily be available in 2027. If a current offer fits your project, it is one way to lock in a known price.
  • The energy code still applies. Whatever year you buy, replacement windows in Sacramento need to meet California’s Title 24 U-factor and SHGC limits.
  • Think about timing. Many Sacramento homeowners like to have new windows in before summer, since that is when old windows make the house hardest to cool.

How to Compare Window Quotes

The lowest number is not always the better deal. When you have more than one quote in hand, check that you are comparing the same things:

  • The same brand and product line, not just “vinyl window”
  • The U-factor and SHGC from the NFRC label on each window
  • Retrofit or full-frame installation
  • Whether permits, removal, and haul-away are included
  • What the warranty covers, for how long, and whether it transfers if you sell

Comparing us against a national brand? Our guide to Renewal by Andersen cost and warranty lays out how it compares to Anlin and Milgard.

We install Anlin windows, which are made in Clovis, California, and Milgard windows. Our window brand guide compares the major brands if you want to read up before you get quotes.

Window Replacement Cost in Sacramento: Common Questions

What is the average cost of window replacement in 2026?

Nationally, published 2026 data puts the average around $800 per window installed, with most projects between about $450 and $1,200 per window. In the Sacramento area, a quality energy-efficient vinyl window typically runs $500 to $800 installed.

How accurate is the window cost calculator?

It is a planning tool built on Sacramento-area market averages. It gives you a realistic range, but it cannot see your frames, your access, or any hidden rot. A free in-home measurement gives you the exact number.

How much does it cost to replace one window in Sacramento?

A standard-size energy-efficient vinyl window usually runs $500 to $800 installed. Replacing a single window can cost more per window than a larger project, because the trip and setup costs are spread over fewer windows.

How much does it cost to replace all the windows in a 3-bedroom house?

A three-bedroom Sacramento home usually has 10 to 15 windows. With energy-efficient vinyl, most projects fall between about $5,000 and $12,000. Fiberglass frames, dark colors, or a bay window will push it higher.

Is it cheaper to replace all my windows at once?

Usually, yes, on a per-window basis. One project means one round of measuring, ordering, and installation instead of several. It also gives the whole house the same look and performance.

Do I need a permit to replace windows in Sacramento?

Many window replacements in California need a permit so the new windows can be checked against the energy code. Fees vary by city and scope. We confirm what your project needs and take care of the permit when one is required.

Is there a federal tax credit for new windows in 2026 or 2027?

No. The Section 25C credit ended for windows installed after December 31, 2025, and no new federal window credit has replaced it as of this update. Check with SMUD or PG&E for any current local programs.

Will window replacement cost more in 2027?

Nobody can promise next year’s prices. Window costs tend to follow material and labor costs, so the 2026 ranges on this page are a reasonable baseline for planning, but get a current written quote before you set your budget.

Do you offer financing?

Yes. Financing is available on approved credit. See our financing page for details.

Where These Numbers Come From

The ranges on this page are rounded market averages for standard-size windows, based on published 2026 cost data from Angi, the This Old House 2026 homeowner survey, and Modernize’s California cost data. National material and style ranges come from Fixr (updated January 2026) and Pella (updated May 2026). Your actual price depends on your home, so the only way to know for sure is a measured quote.

Get an Exact Price for Your Home

We will measure your windows, show you frame and glass options, and give you a written price at a free in-home estimate. Call 916-727-6717 or request your free estimate online. You can also learn more about our Sacramento window replacement service.

About the reviewer: Tom Orr founded Northwest Exteriors in 1995 and has led the company as CEO for more than 30 years. Under his direction, Northwest Exteriors has installed windows, entry doors, and siding for homeowners across California and Hawaii. California Contractor License #710798.